Thank you for using the timer - this advanced tool can estimate your performance and suggest more practice questions. We have subscribed you to Daily Prep Questions via email.

Customized for You

we will pick new questions that match your level based on your Timer History

Track Your Progress

every week, we’ll send you an estimated GMAT score based on your performance

Practice Pays

we will pick new questions that match your level based on your Timer History

Not interested in getting valuable practice questions and articles delivered to your email? No problem, unsubscribe here.

Thank you for using the timer!
We noticed you are actually not timing your practice. Click the START button first next time you use the timer.
There are many benefits to timing your practice, including:

A certain swimming pool of 10000 liters has three pipes; [#permalink]
06 Aug 2003, 09:25

1

This post was BOOKMARKED

A certain swimming pool of 10000 liters has three pipes; pipe A to fill and pipes B and C to pour out. A fills the pool at 1000 liters per hour; B pours out at 200 lph; C pours out at 100 lph. All the pipes start to work simultaneously. Unfortunately, due to some problem, A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working. However, all the pipes work until the pool is full. How long does it take them to fill the pool completely?

A certain swimming pool of 10000 liters has three pipes; pipe A to fill and pipes B and C to pour out. A fills the pool at 1000 liters per hour; B pours out at 200 lph; C pours out at 100 lph. All the pipes start to work simultaneously. Unfortunately, due to some problem, A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working. However, all the pipes work until the pool is full. How long does it take them to fill the pool completely?

A admit I used a calculator because this challenge is not a 2,(027) min question.

Answers are:
7h54min with faulty A,B,C, vaults and
7h42min if A,B,C work constantly. _________________

The faulty valts answer is calculated on the conditions of a 5 min per hour break for all the vaults, where as the original Q states that B&C rest after every 30 min. Therefore, it will take some 10-15 min faster to fill the pool.
My fault. _________________

Sorry guys, it's late in the evening here and I needed to eat some water melon to reconsider my answer. The exam date is approaching and I often catch myself thinking about it even in the most peculiar places.

Unswer is 15 hours.

Logic is as follows:

A pours in 1000*55/60 liters an hour (l/h)
B pours out 200*50/60 l/h
C pours out 100*50/60 l/h

To get a total amount of water that is added into the swimming pool every hour, substract B&C from A. It's 666,(6)liters.
Time=work/rate => 10000/666(6)=15 hours. _________________

We see that pipe A fills in 1000 gal in 65 minutes (1 hr filling and 5 min. rest).

We see that B & C drains out 300 gal. in 70 minutes (1/2 hr draining, 5 min rest, 1/2 hr draining and another 5 min. rest)

So, I suppose the total time taken is 910x. Why? Because, the LCM of 65 and 70 is 910. I used a factor x with it because I do not know yet whether 910 is the time taken in minutes, YET.

Now, A fills in 1000/65*910x gallons in 910x minutes
or, A fills in 14000x gallons

A certain swimming pool of 10000 liters has three pipes; pipe A to fill and pipes B and C to pour out. A fills the pool at 1000 liters per hour; B pours out at 200 lph; C pours out at 100 lph. All the pipes start to work simultaneously. Unfortunately, due to some problem, A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working. However, all the pipes work until the pool is full. How long does it take them to fill the pool completely?

Becareful the way you word/interpret the problems. The problem actually states that A stops working AFTER working for one hour, and pipes B and C stop working AFTER working for 30 minutes. This is entirely different than if A stops working once every hour (i.e., after working for 55 minutes) and B and C stop working once every half hour (i.e., after working 25 minutes), which is the problem that everyone solved.

Stolyar, what is your intention here? _________________

Best,

AkamaiBrah Former Senior Instructor, Manhattan GMAT and VeritasPrep Vice President, Midtown NYC Investment Bank, Structured Finance IT MFE, Haas School of Business, UC Berkeley, Class of 2005 MBA, Anderson School of Management, UCLA, Class of 1993

AkamaiBrah,
I don't agree. The problem states "A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working."

If "A stops working AFTER working for one hour, and pipes B and C stop working AFTER working for 30 minutes" then the pool will never be filled.

AkamaiBrah, I don't agree. The problem states "A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working."

If "A stops working AFTER working for one hour, and pipes B and C stop working AFTER working for 30 minutes" then the pool will never be filled.

I'm sure he means 5 mnutes after each hour and half hour respectively, but your observation is besides my point. My point is that 5 minutes "after" each hour and half-hour is still different from 5 minutes "at the end" of each hour and half-hour respectively. The solution of 15 hours is the solution to the latter interpretation, which is not what Stolyar asked. The answer to the first interpretation is a few minutes less.

The answers are not different by much, BUT THEY ARE STILL DIFFERENT. _________________

Best,

AkamaiBrah Former Senior Instructor, Manhattan GMAT and VeritasPrep Vice President, Midtown NYC Investment Bank, Structured Finance IT MFE, Haas School of Business, UC Berkeley, Class of 2005 MBA, Anderson School of Management, UCLA, Class of 1993

the way i modeled this in order to be able to do this in about two minutes was to say that pipe A filled at a rate of 1000 * 11/12 lph and i mentally combined pipes B and C into one pipe emptying at 300 * 5/6 lph.

Then I set up the equation:

X (11000/12 - 1500/6) = 10000

By hand, X is about 15, a little more. Hope that is accurate enough for the GMAT!!!

A certain swimming pool of 10000 liters has three pipes; pipe A to fill and pipes B and C to pour out. A fills the pool at 1000 liters per hour; B pours out at 200 lph; C pours out at 100 lph. All the pipes start to work simultaneously. Unfortunately, due to some problem, A stops for 5 minutes after each hour of working. B and C stop for 5 minutes after each half an hour of working. However, all the pipes work until the pool is full. How long does it take them to fill the pool completely?

Becareful the way you word/interpret the problems. The problem actually states that A stops working AFTER working for one hour, and pipes B and C stop working AFTER working for 30 minutes. This is entirely different than if A stops working once every hour (i.e., after working for 55 minutes) and B and C stop working once every half hour (i.e., after working 25 minutes), which is the problem that everyone solved.

Stolyar, what is your intention here?

Sure you are correct! A works for a COMPLETE HOUR (60 minutes) then stops for 5 minutes. B and C work for HALF AN HOUR (30 min) and then stop for 5 min. And so on and so forth, until the pull is full. I invented the question occasionally yesterday, so figures can be raw. A hint: re-consider rates. My solution is to go public soon.

1. Unite pouring pipes in one that works at the rate of 300 lph
2. Translate nominal rates into actual ones.

Since we deal with minutes, it is reasonable to get rid of hours

the nominal R(fill)=1000/60 lpm
the nominal R(pour)=300/60 lpm

the actual R(fill)=1000/65=200/13 lpm (because of a 5-minute stop after each 60 m)
the actual R(pour)=150/35=30/7 lpm (because of a 5-minute stop after each 30 m)

WORK=RATE*TIME

10000=(200/13-30/7)*X in minutes

X=910000/1010=901 munutes approximately, or 15 hours and 1 minute.

Hey everyone, today’s post focuses on the interview process. As I get ready for interviews at Kellogg and Tuck (and TheEngineerMBA ramps up for his HBS... ...

I got invited to interview at Sloan! The date is October 31st. So, with my Kellogg interview scheduled for this Wednesday morning, and my MIT Sloan interview scheduled...