How many hours does it take 12 machines with identical production rate

1. one machine can finish in 60hrs. So one machines hour rate 1/60. for 12 machines it will be 12/60 = 1/5 per hour.
So it can finish in 5 hrs,
Sufficient

2.10 machines can complete in 6 hrs
so total 60 hours will take to complete the order for a machine.
the same method as above can be followed to determine the hours.
Sufficient

Ans D

1: sufficient - if it 60hrs for one machine then it will take 5hrs for 12 machines
2: sufficient - 6*10 / 12 = 5

Ans D
_________________

D


Machines are running at identical rate

(a) Sufficient. 1 Machine take 60 hours to fill order.... so rate = 1/60... so it would take 5 hours to complete the order by 12 machines
(b) Sufficient ... 10 machines take 6 hrs... so rate =1/60... so it would take 5 hrs to complete

Answer is D

St 1 Let rate of each machine be R then Time taken by 12 machines will be (12*R) *Time= Work

St1 1 machine takes 60 hrs so we have 1*R*60=W=12R*T or Time taken by 12 machines =5 hrs

St2 says 10*R*6=12R*T or T=5 hrs...Sufficient

Ans D
_________________

1 machine takes 60 hrs so 12 machines take 60/12=5 hrs A suff.
10 machines take 6 hrs so 12 machines will take 10*6/12 =5 hrs. B suff
Hence D

Statement 1: It takes each machine alone, running continuously, 60 hours to fill the production order
60/12 = 5hrs -- Sufficient

Statement 2: It takes 10 of these machines, running simultaneously without stopping, 6 hours to fill the production order
h*12=6*10 --> h=5hrs -- Sufficient

Each Statement alone is sufficient, Answer D

I would like to point out that every post on this thread so far has figured out the exact time it will take the 12 machines to complete this order. Data sufficiency is not about finding the exact time it takes. Data sufficiency is about knowing that you will get one definite answer. For many questions, finding out the exact number is a waste of time.

For this problem, you have 3 variables: Output, rate, and time. (Output = rate * time)
You know that you need 2 of the 3 variables in order to get one definite answer.

The question stem gives you almost enough for rate, but not quite enough. It does let you know that all of the rates are the same. So if you get the rate for one machine, you have the rate for all the machines.

The first stimulus gives you the rate and the time for one machine. This will be the same for all the machines. Since it gives you 2 of the 3 variables, the first stimulus is sufficient.

The second stimulus gives you the rate and time for ten machines. You know that you can get the information for the individual machines because the rates are the same for all. Since it gives you 2 of the 3 variables, the second stimulus is sufficient.

The answer is D.

Notice that you don't have to calculate anything for this problem to get the answer. You just have to recognize what information you need, and know when that information is provided. Calculating the exact time it takes for the 12 machines is a waste of time for this problem.

Again, I just want to point out that data sufficiency is, much of the time, not about calculating the exact answer. Data sufficiency is about knowing that you have enough information to get one definite answer.

Hope this helps!

The correct answer is D. Good job everyone!
_________________

hi Bunuel

One doubt...

If the question stem states different rates for machines then B is not sufficient right??????

Yes, in that case B would be insufficient.
_________________

From (1)


So, let total work be 60 units
Thus 12 machines will take \(\frac{60}{12} = 5\ hours\)

From (2)


So, let total work be 60 units
Thus 12 machines will take \(\frac{60}{12} = 5\ hours\)

Thus EACH statement ALONE is sufficient to answer the question asked, answer will be (D)
_________________

Asked: How many hours does it take 12 machines with identical production rates, running simultaneously without stopping, to fill a certain production order ?

(1) It takes each machine alone, running continuously, 60 hours to fill the production order.
12 machines will take = 60/12 =5 hours to fill the production order
SUFFICIENT

(2) It takes 10 of these machines, running simultaneously without stopping, 6 hours to fill the production order.
12 machines will take = 6*10/12 =5 hours to fill the production order
SUFFICIENT

IMO D

Hello from the GMAT Club BumpBot!

Thanks to another GMAT Club member, I have just discovered this valuable topic, yet it had no discussion for over a year. I am now bumping it up - doing my job. I think you may find it valuable (esp those replies with Kudos).

Want to see all other topics I dig out? Follow me (click follow button on profile). You will receive a summary of all topics I bump in your profile area as well as via email.
_________________