M10-28

No. We are given that the circumference of the front wheels is 1 meter and the radius of the front wheels is half that of the rear wheels.

Thus, the circumference of the front wheels is \(2\pi{r}=1\) and the circumference of the rear wheels is \(2\pi{(2r)}=2*2\pi{r}=2\).

So, we are dividing the distance with the circumference.

Hope it's clear.

are basically tryimg to find how many circumferences in the distance the cart travelled? So is resolution a full 360 degree circum?

thanks

One 360-degree revolution = the distance of one circumference.

What is the basic relation between Distance, Revolution, Circumference?

Is it Distance = No of Revolutions * Circumference ? Is this correct?

Yes, that;s correct.

Check similar questions to practice:
a-circular-rim-28-inches-in-diameter-rotates-the-same-number-65106.html
two-wheels-are-connected-via-a-conveyor-belt-the-larger-133697.html
how-long-in-minutes-did-it-take-a-bicycle-wheel-to-roll-130026.html
what-is-the-number-of-360-degree-rotations-that-a-bicycle-wh-166668.html
the-circumference-of-the-front-wheel-of-a-cart-is-30-ft-long-90588.html

Hope it helps.

I guess it needs less math thinking than rational thinking. Hope I will explain well enough. Let's put the information we have together:

Radius of front wheel: r
Radius of rear wheel: 2r

This means that when the front wheel makes 1 whole revolution, the rear one makes 2. That because its diameter (2 radii) is twice as large, so it covers twice the distance of the front wheel at the same time (if the weels were not attached, when the front wheel covers 5 meters, the back would cover 10). Put differently, since the wheels are actually attached to the same vehicle, the distance the rear wheel has covered in the same amount of time with the front is half the distance of the front (if the front wheel covered 10 meters, the read wheel covered 5).

Now, we know that the circumference is 1 meter (so, in 1 meter the cart makes 1 revolution) and that the cart covered 1
km.

In others words:
1 revolution in 1 meter
x revolutions in 1000 meters?
x = 1000 for the front wheel, so x = 500 for the rear wheel.

Distance = Revolutions*Circumference ---> Revolutions = Distance/Circumference = 1km/Circumference

We need to find the circumference of the back tire using a relation to the circumference of the front tire.

Radius of front wheel (Rf): 1 meter = 2*Pi*Rf ---> Rf = 1/(2*Pi) meters
Radius of back wheel (Rb): 2*Rf = 1/Pi meters since it is stated that the radius of the back tire is twice that of the front
Circumference of back wheel (Cb) = 2*Pi*Rb = 2 meters

Revolutions = 1km/2 meters = 1*10^3 meters/2 meters = 500 meters

Nice question, you don't even have to lift the pen to answer it.

Very cool - its like being tricked with word changes. The question talks about radius first and then mentions (*casually*) the circumferences. I was busy trying to calculate the 2 pi R; whereas its already there! :D

I have edited the question and the solution by adding more details to enhance its clarity. I hope it is now easier to understand.