Despite their acronymic similarity, LEDs and LCDs represent distinct

Despite their acronymic similarity, LEDs and LCDs represent distinct display technologies. In LEDs, or light-emitting diodes, two different semiconductor materials are layered together: n-type, in which mobile electrons carry negative charge, and p-type, in which “holes” in an otherwise bound sea of electrons carry positive charge. When electric current flows through the p-n junction between layers, an n-type electron falling into a p-type hole releases a photon, a specifically colored particle of light.
The dominant technology currently used in most consumer product displays is the active matrix liquid crystal diode display (LCD). LCDs apply thin-film transistors (TFTs) of amorphous silicon sandwiched between two glass plates. The TFTs supply voltage to liquid-crystal-filled cells, or pixels, between the sheets of glass. Liquid crystals can twist the polarization, or wave orientation, of light. Just as a guitar string can vibrate sideways or up and down, so a light wave can be polarized horizontally or vertically. Polarizing filters act as selective gates, transmitting light polarized one way but not the other. Within a pixel, liquid crystals in their relaxed, coiled state rotate the polarization of ambient light enough to make surrounding filters transparent. Alternatively, applied electrical signals uncoil the crystals, causing the filters to block light and the pixel to become opaque. LCDs that are capable of producing color images, such as in televisions and computers, reproduce colors by blocking out particular color wavelengths from the spectrum of white light until only the desired color remains. The variation of the intensity of light permitted to pass through the matrix of liquid crystals enables LCD displays to present images full of gradations of different colors.
The amount of power required to untwist the crystals to display images is much lower than that required for analogous processes using other technologies, such as plasma. The dense array of crystals displays images from computer sources extremely well, with full color detail, no flicker, and no screen burn-in. Moreover, the number of pixels per square inch on an LCD is typically higher than that for other display technologies; LCD monitors are excellent at displaying large amounts of data with exceptional clarity and precision.

Which of the following can be inferred about uncoiled liquid crystals in an LCD pixel?

A They are opaque to ambient light.

B They are in a relaxed state, in comparison to their high-energy coiled state.

C They are found in one of two wave orientations, horizontal or vertical.

D They fail to rotate the polarization of surrounding photons enough to allow them to pass through nearby filters.

E They cause the pixel to become transparent.