Author 
Message 
TAGS:

Hide Tags

Senior Manager
Joined: 08 Jul 2004
Posts: 441

The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
Updated on: 26 Nov 2018, 04:30
Question Stats:
55% (02:11) correct 45% (02:12) wrong based on 761 sessions
HideShow timer Statistics
The figure above shows the dimensions of a semicircular cross section of a oneway tunnel. The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel. If vehicles must clear the top of the tunnel by at least 1/2 foot when they are inside the traffic lane, what should be the limit on the height of vehicles that are allowed to use the tunnel? A. 5 ½ ft B. 7 ½ ft C. 8 ½ ft D. 9 ½ ft E. 10 ft Attachment:
untitled.PNG [ 7.01 KiB  Viewed 45698 times ]
Official Answer and Stats are available only to registered users. Register/ Login.
Originally posted by saurya_s on 23 Sep 2004, 15:25.
Last edited by Bunuel on 26 Nov 2018, 04:30, edited 2 times in total.
Renamed the topic and edited the question.




Math Expert
Joined: 02 Sep 2009
Posts: 59712

The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
23 Jul 2014, 02:24
Nihit wrote: The figure above shows the dimensions of a semicircular cross section of a oneway tunnel. The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel. If vehicles must clear the top of the tunnel by at least 1/2 foot when they are inside the traffic lane, what should be the limit on the height of vehicles that are allowed to use the tunnel? A. 5½ ft B. 7½ ft C. 8 ½ ft D. 9½ ft E. 10 ft See the diagram attached: Rectangle inscribed has the length of traffic lane 12. So max height of vehicle will be 1/2 foot less than the width of this rectangle. Now, let O be the center of the semicircle, then OA=radius=20/2=10 and OB=12/2=6 > \(AB=\sqrt{OA^2OB^2}=\sqrt{10^26^2}=8\). So max height of the vehicle that are allowed to use the tunnel is 80.5=7.5. Answer: B. Attachment:
untitled.PNG [ 2.53 KiB  Viewed 17671 times ]
_________________




VP
Joined: 07 Nov 2007
Posts: 1125
Location: New York

Re: The figure above shows the dimensions of a semicircular cros
[#permalink]
Show Tags
04 Sep 2008, 07:49
Nihit wrote: Attachment: IMAGE.JPG The figure above shows the dimensions of a semicircular cross section of a oneway tunnel(dia= 20 ft). The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel. If vehicles must clear the top of the tunnel by at least ½ foot when they are inside the traffic lane, what should be the limit on the height of vehicles that are allowed to use the tunnel? A. 5½ ft B. 7½ ft C. 8 ½ ft D. 9½ ft E. 10 ft radius =10 Say AOB is base of the semi circle. points X and Y are on edges of the traffic lane (XY=12) OX=6 Find the height perpendicular to X and touches the semi circle. = sqrt (6^2+10^2) =8 we need 1/2 ft clearance. so height must be (81/2) =71/2 ft B.




Senior Manager
Joined: 25 Dec 2003
Posts: 281
Location: India

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
23 Sep 2004, 21:44
See attachement, If unclear, let me know.
Regards
Attachments
q4_870.jpg [ 31.85 KiB  Viewed 30796 times ]



Senior Manager
Status: Time to step up the tempo
Joined: 24 Jun 2010
Posts: 327
Location: Milky way
Schools: ISB, Tepper  CMU, Chicago Booth, LSB

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
03 Sep 2010, 22:35
udaymathapati wrote: The figure attached shows the dimensions of a semicircular cross section of a oneway tunnel. The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel. If vehicles must clear the top of the tunnel by at least ½ foot when they are inside the traffic lane, what should be the limit on the height of vehicles that are allowed to use the tunnel? A. 5½ ft B. 7½ ft C. 8 ½ ft D. 9½ ft E. 10 ft My approach: Equation of the circle  x^2 + y^2 = a^2 (a is the radius of the circle which is 10 feet.) The diameter of the semicircle is 20 and the traffic lane is 12 feet wide and located at equal distance from the sides of the tunnel. The width of the traffic lane should be 4 feet away from each of the sides. If we position the center of the tunnel (center of the semicircle) to overlap exactly on the origin of the xy coordinate graph then the center of the semicircle would be the origin (0,0) and the end points of the traffic lane would be (6,0) and (6,0). Let us take one of the edges of the traffic lane  (6,0). We need to find distance from the xaxis to the edge of the semicircle ... that is the y coordinate. Making use of the equation of the circle  x^2 + y^2 = 100 .. we already know x coordinate which is 6. Hence y^2 = 100  36. y^2 = 64. Hence y is 8. Hence the height of the tunnel at the edge of the traffic lane is 8 feet high. Minimum clearance should be 1/2 feet hence the maximum height of the vehicles allowed is 7.5 feet.



Senior Manager
Status: Time to step up the tempo
Joined: 24 Jun 2010
Posts: 327
Location: Milky way
Schools: ISB, Tepper  CMU, Chicago Booth, LSB

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
04 Sep 2010, 23:40
A little correction to my previous post.
The equation of the circle with the given center as (h,k) and radius as r is
(xh)^2 + (yk)^2 = r^2.
Since the semicircle is centered at origin (0,0) the equation was noted as x^2 + y^2 = r^2.



Intern
Status: Impossible is just an opinion
Joined: 31 Oct 2012
Posts: 43
Location: Ukraine
Concentration: Strategy, Marketing
GMAT 1: 590 Q47 V24 GMAT 2: 650 Q47 V34 GMAT 3: 670 Q49 V31 GMAT 4: 690 Q48 V37
GPA: 3.8
WE: Marketing (Consumer Products)

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
30 Nov 2013, 14:51
Hi Guys! I was thinking about extreme cases, such a truck with cylidrical tank. In this case you would not take into account the width of the lane. Hence the maximum height of the truck would be R  1/2 = 101/2 = 9 1/2 (where R is the radius of the semicircular cross). Unfortuantely, this answer is wrong, but I still think that it is valid. Can somebody explain why I'm wrong? THX!
Attachments
File comment: example of the truck I was thinking about
fuel_truck_aircraft_3000_gallons_ford_4.jpg [ 22.09 KiB  Viewed 28771 times ]



Intern
Joined: 16 Sep 2014
Posts: 9

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
19 Nov 2014, 17:33
MDK wrote: Hi Guys! I was thinking about extreme cases, such a truck with cylidrical tank. In this case you would not take into account the width of the lane. Hence the maximum height of the truck would be R  1/2 = 101/2 = 9 1/2 (where R is the radius of the semicircular cross). Unfortuantely, this answer is wrong, but I still think that it is valid. Can somebody explain why I'm wrong? THX! Hi, late response but it might be helpful to someone else. The reason is because any truck can only have a maximum width = width of the lane, that's what the problem is saying. that means, there are parts of the truck, end points on two sides that can only rise to the height limited by the ceiling of the tunnel at those end points, which is the distance we are trying to find out = 8. hope it's clear.



Manager
Status: Kitchener
Joined: 03 Oct 2013
Posts: 87
Location: Canada
Concentration: Finance, Finance
GPA: 2.9
WE: Education (Education)

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
11 Feb 2015, 08:31
I have question here, if in the above question they sid that If vehicles must clear the top of the
tunnel by at least 1/2 foot when they are inside the traffic lane. So, they ask about the max
height of the vehicles that allowed to cross the tunnel.We have the radius = 10. So max height of
the vehicle that are allowed to use the tunnel is 10 0.5 = 9.5 what is the wrong here?



Intern
Joined: 31 Dec 2014
Posts: 8
Location: United States
Concentration: Marketing

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
11 Feb 2015, 12:57
23a2012 wrote: I have question here, if in the above question they sid that If vehicles must clear the top of the
tunnel by at least 1/2 foot when they are inside the traffic lane. So, they ask about the max
height of the vehicles that allowed to cross the tunnel.We have the radius = 10. So max height of
the vehicle that are allowed to use the tunnel is 10 0.5 = 9.5 what is the wrong here? The tunnel is rounded and the lane is 12 feet with 4 feet of space on each side, so the vechicle can't be higher than the edges of the lane. Each half of the lane is 6 feet long, so the max height is 1/2 foot smaller than the height of the tunnel 6 feet from the center. It really helped me to draw it out. As I wrote out the given dimensions, I realized I had a 6810 Pythagorean Triple.



Veritas Prep GMAT Instructor
Joined: 16 Oct 2010
Posts: 9876
Location: Pune, India

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
11 Feb 2015, 22:24
23a2012 wrote: I have question here, if in the above question they sid that If vehicles must clear the top of the
tunnel by at least 1/2 foot when they are inside the traffic lane. So, they ask about the max
height of the vehicles that allowed to cross the tunnel.We have the radius = 10. So max height of
the vehicle that are allowed to use the tunnel is 10 0.5 = 9.5 what is the wrong here? The truck has a width. The entire truck must pass through the semi circular tunnel. I did not get the image I had in mind but look here: Attachment:
010MontBlancTunnelTermographiccontrolTruck2011.jpg [ 239.44 KiB  Viewed 26759 times ]
Now imagine that the tunnel is semi circular. If the truck has height of 9.5, its edges will not pass through the sides. Its height needs to be lesser. Since the traffic lane is 12 feet wide and vehicles must stay inside traffic lane, the maximum width of the vehicle will be 12 feet and that will set the limit on the maximum height allowed.
_________________
Karishma Veritas Prep GMAT Instructor
Learn more about how Veritas Prep can help you achieve a great GMAT score by checking out their GMAT Prep Options >



Manager
Status: Kitchener
Joined: 03 Oct 2013
Posts: 87
Location: Canada
Concentration: Finance, Finance
GPA: 2.9
WE: Education (Education)

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
12 Feb 2015, 06:20
VeritasPrepKarishma wrote: 23a2012 wrote: I have question here, if in the above question they sid that If vehicles must clear the top of the
tunnel by at least 1/2 foot when they are inside the traffic lane. So, they ask about the max
height of the vehicles that allowed to cross the tunnel.We have the radius = 10. So max height of
the vehicle that are allowed to use the tunnel is 10 0.5 = 9.5 what is the wrong here? The truck has a width. The entire truck must pass through the semi circular tunnel. I did not get the image I had in mind but look here: Attachment: 010MontBlancTunnelTermographiccontrolTruck2011.jpg Now imagine that the tunnel is semi circular. If the truck has height of 9.5, its edges will not pass through the sides. Its height needs to be lesser. Since the traffic lane is 12 feet wide and vehicles must stay inside traffic lane, the maximum width of the vehicle will be 12 feet and that will set the limit on the maximum height allowed. Dear Karishma,thank you +1 KUDOS



Manager
Joined: 03 May 2013
Posts: 68

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
28 May 2015, 21:09
Alt Solution please refer image
Attachments
20150529_093316.jpg [ 2.95 MiB  Viewed 26190 times ]



Current Student
Joined: 08 Jan 2015
Posts: 73

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
14 Aug 2016, 02:53
Even though this question is from GMATprep, I think it's very ambiguous since the question doesn't mention that the car should/could be as wide as the whole lane.



Manager
Joined: 22 Sep 2014
Posts: 104

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
07 Sep 2018, 17:11
maths is easy ...to understand the problem is really hard for a nonnative speaker



Intern
Joined: 21 Nov 2018
Posts: 4

Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
Show Tags
23 Dec 2018, 19:10
How are we certain that the shape of the traffic lane is rectangular? Can't it have a curved head?




Re: The figure above shows the dimensions of a semicircular cross section
[#permalink]
23 Dec 2018, 19:10






