Events & Promotions
|
|
GMAT Club Daily Prep
Thank you for using the timer - this advanced tool can estimate your performance and suggest more practice questions. We have subscribed you to Daily Prep Questions via email.
Customized
for You
Track
Your Progress
Practice
Pays
Not interested in getting valuable practice questions and articles delivered to your email? No problem, unsubscribe here.
Apr 2808:00 AM PDT
-11:00 AM PDT
Whether you are just beginning your MBA journey or fine-tuning your path to a 700+ score, GMAT Day is designed to give you a competitive edge.
Apr 2912:30 AM EDT
-01:30 AM EDT
Learn how Kamakshi achieved a GMAT 675 with an impressive 96th %ile in Data Insights. Discover the unique methods and exam strategies that helped her excel in DI along with other sections for a balanced and high score.
Apr 3001:30 AM EDT
-02:30 AM EDT
At one point, she believed GMAT wasn’t for her. After scoring 595, self-doubt crept in and she questioned her potential. But instead of quitting, she made the right strategic changes. The result? A remarkable comeback to 695. Check out how Saakshi did it.
May 0111:00 AM PDT
-12:00 PM PDT
Free- full-length test + 15 concept videos + 150+ short videos + study plan!
May 0306:30 AM PDT
-08:30 AM PDT
Verbal trouble on GMAT? Fix it NOW! Join Sunita Singhvi for a focused webinar on actionable strategies to boost your Verbal score and take your performance to the next level.
11 Jun 2023, 20:00
Kudos
Bookmarks
Question 1
C
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
15%
(low)
Question Stats:
79% (02:28) correct
21%
(02:22) wrong
based on 101
sessions
History
Date
Time
Result
Not Attempted Yet
Question 2
C
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
5%
(low)
Question Stats:
95% (00:49) correct 5%
(00:45) wrong
based on 100
sessions
History
Date
Time
Result
Not Attempted Yet
Question 3
A
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
5%
(low)
Question Stats:
99% (00:23) correct 1%
(00:15) wrong
based on 94
sessions
History
Date
Time
Result
Not Attempted Yet
Question 4
B
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
65%
(hard)
Question Stats:
35% (01:09) correct 65%
(01:04) wrong
based on 94
sessions
History
Date
Time
Result
Not Attempted Yet
Question 5
B
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
35%
(medium)
Question Stats:
58% (00:55) correct 42%
(00:58) wrong
based on 94
sessions
History
Date
Time
Result
Not Attempted Yet
Question 6
A
Be sure to select an answer first to save it in the Error Log before revealing the correct answer (OA)!
Difficulty:
5%
(low)
Question Stats:
95% (00:27) correct 5%
(01:12) wrong
based on 85
sessions
History
Date
Time
Result
Not Attempted Yet
Aluminum is the most abundant metallic element in Earth’s crust, but it is never found naturally as an element. Instead, it always appears naturally in its oxidized form as a hydroxide we call bauxite.
The extraction of aluminum from bauxite requires three stages. First, the ore is mined. Then it is refined to recover alumina. Finally, the alumina is smelted to produce aluminum. The mining is done via the open-cut method. Bulldozers remove the topsoil, and excavators or other types of power machinery are used to remove the underlying layer of bauxite. The bauxite may be washed to remove clay and other detritus.
Refining is done via the Bayer refining process, named after its inventor, Karl Bayer. Ground bauxite is fed into a digester, where it is mixed with a caustic soda. The aluminum oxide reacts with the soda to form a solution of sodium aluminate and a precipitate of sodium aluminums silicate. The solution is separated from the silicate through washing and pumping, and the alumina is precipitated from the solution, where it appears as crystals of alumina hydrate. The crystals are washed again to remove any remaining solution. Then they are heated to remove water, leaving the gritty alumina.
Smelting is done via the Hall-Heroult smelting process. An electric current is passed through a molten solution of alumina and cryolite, which is in a cell lined at the bottom and top with carbon. This forces the oxygen to combine with the carbon at the top of the cell, making carbon dioxide, while the molten metallic aluminum collects at the bottom of the cell, where it is siphoned off, cleaned up, and cast into bars, sheets, or whatever form is needed.
As with all mining of metals, bauxite mining presents certain hazards. Along with the usual mining issues of degraded soil and polluted runoff, chief among these hazards is the omnipresent bauxite dust, which clogs machinery and lungs, sometimes for miles around the mining site. Jamaica and Brazil have seen widespread protests recently against the major bauxite mining companies, which continue to insist that no link between bauxite dust and pervasive lung problems has been proved.
The extraction of aluminum from bauxite requires three stages. First, the ore is mined. Then it is refined to recover alumina. Finally, the alumina is smelted to produce aluminum. The mining is done via the open-cut method. Bulldozers remove the topsoil, and excavators or other types of power machinery are used to remove the underlying layer of bauxite. The bauxite may be washed to remove clay and other detritus.
Refining is done via the Bayer refining process, named after its inventor, Karl Bayer. Ground bauxite is fed into a digester, where it is mixed with a caustic soda. The aluminum oxide reacts with the soda to form a solution of sodium aluminate and a precipitate of sodium aluminums silicate. The solution is separated from the silicate through washing and pumping, and the alumina is precipitated from the solution, where it appears as crystals of alumina hydrate. The crystals are washed again to remove any remaining solution. Then they are heated to remove water, leaving the gritty alumina.
Smelting is done via the Hall-Heroult smelting process. An electric current is passed through a molten solution of alumina and cryolite, which is in a cell lined at the bottom and top with carbon. This forces the oxygen to combine with the carbon at the top of the cell, making carbon dioxide, while the molten metallic aluminum collects at the bottom of the cell, where it is siphoned off, cleaned up, and cast into bars, sheets, or whatever form is needed.
As with all mining of metals, bauxite mining presents certain hazards. Along with the usual mining issues of degraded soil and polluted runoff, chief among these hazards is the omnipresent bauxite dust, which clogs machinery and lungs, sometimes for miles around the mining site. Jamaica and Brazil have seen widespread protests recently against the major bauxite mining companies, which continue to insist that no link between bauxite dust and pervasive lung problems has been proved.
1. Based on the information in the second paragraph, you can conclude that bauxite is located
(A) within the topsoil
(B) wherever clay is found
(C) below the topsoil
(D) below Earth’s crust
(E) along riverbanks
(A) within the topsoil
(B) wherever clay is found
(C) below the topsoil
(D) below Earth’s crust
(E) along riverbanks
2. According to the passage, all of these are produced by the Bayer process except
(A) sodium aluminum silicate
(B) sodium aluminate
(C) aluminum manganese
(D) alumina hydrate
(E) alumina
(A) sodium aluminum silicate
(B) sodium aluminate
(C) aluminum manganese
(D) alumina hydrate
(E) alumina
3. The ideas in the second, third, and fourth paragraphs are related because they are
(A) steps in a process
(B) examples of a mineral
(C) reasons for mining
(D) comparisons among theories
(E) suggested solutions
(A) steps in a process
(B) examples of a mineral
(C) reasons for mining
(D) comparisons among theories
(E) suggested solutions
4. The process by which aluminum is extracted from bauxite is most similar to which of the following?
(A) The building of steel bridges
(B) The making of copper tubing
(C) The manufacturing of glass
(D) The mixing of cement
(E) The growth of most grains
(A) The building of steel bridges
(B) The making of copper tubing
(C) The manufacturing of glass
(D) The mixing of cement
(E) The growth of most grains
5. The author includes the discussion of protests primarily to show that
(A) bauxite mining takes place in the Third World
(B) workers are starting to fight back against the dangers of mining
(C) mining companies have misled people for decades
(D) the government of Brazil works with the mining companies
(E) miners have a tradition of unionization
(A) bauxite mining takes place in the Third World
(B) workers are starting to fight back against the dangers of mining
(C) mining companies have misled people for decades
(D) the government of Brazil works with the mining companies
(E) miners have a tradition of unionization
6. The tone of the passage suggests that the author would most likely believe which of the following?
(A) Bauxite mining poses health problems.
(B) The United States should use less aluminum.
(C) Australian bauxite is the best quality.
(D) Karl Bayer was something of a genius.
(E) Mining is becoming cheaper and safer.
(A) Bauxite mining poses health problems.
(B) The United States should use less aluminum.
(C) Australian bauxite is the best quality.
(D) Karl Bayer was something of a genius.
(E) Mining is becoming cheaper and safer.
RC Butler 2023 - Practice Two RC Passages Everyday.
Passage # 187 Date: 12-Jun-2023
This question is part of RC Butler 2023. Click here for Details
Passage # 187 Date: 12-Jun-2023
This question is part of RC Butler 2023. Click here for Details
20 Jun 2023, 12:56
Kudos
Bookmarks
Ruchi007
Official Explanation
4. The process by which aluminum is extracted from bauxite is most similar to which of the following?
Explanation
The process by which aluminum is extracted from bauxite is most similar to (B) the making of copper tubing.
In the given passage, it is explained that the extraction of aluminum from bauxite involves three stages: mining, refining, and smelting. First, the ore (bauxite) is mined using the open-cut method. This involves removing the topsoil and excavating the underlying layer of bauxite. This initial stage of mining is similar to how copper is obtained, as copper is also extracted from ore through mining processes.
After the bauxite is mined, it goes through the refining stage. The refining process involves the Bayer refining process, where ground bauxite is mixed with a caustic soda. This mixture undergoes chemical reactions, resulting in the separation and precipitation of alumina hydrate crystals. This refining process, which involves chemical reactions and separation, is similar to the manufacturing of copper tubing. Copper tubing is produced through refining and shaping processes, involving the manipulation and transformation of copper material into tubular forms.
Finally, the alumina obtained from refining goes through the smelting stage to produce aluminum. In the Hall-Heroult smelting process, a molten solution of alumina and cryolite is subjected to an electric current. This process allows for the separation of aluminum from other elements and its collection at the bottom of the cell. Similarly, in the making of copper tubing, copper is often melted and cast into desired shapes and forms, which involves a smelting-like process.
Therefore, the process by which aluminum is extracted from bauxite is most similar to the making of copper tubing (option B). Both processes involve mining of the raw material, refining or purification of the desired substance, and subsequent casting or shaping of the material into usable forms.
Answer: B
Explanation
The process by which aluminum is extracted from bauxite is most similar to (B) the making of copper tubing.
In the given passage, it is explained that the extraction of aluminum from bauxite involves three stages: mining, refining, and smelting. First, the ore (bauxite) is mined using the open-cut method. This involves removing the topsoil and excavating the underlying layer of bauxite. This initial stage of mining is similar to how copper is obtained, as copper is also extracted from ore through mining processes.
After the bauxite is mined, it goes through the refining stage. The refining process involves the Bayer refining process, where ground bauxite is mixed with a caustic soda. This mixture undergoes chemical reactions, resulting in the separation and precipitation of alumina hydrate crystals. This refining process, which involves chemical reactions and separation, is similar to the manufacturing of copper tubing. Copper tubing is produced through refining and shaping processes, involving the manipulation and transformation of copper material into tubular forms.
Finally, the alumina obtained from refining goes through the smelting stage to produce aluminum. In the Hall-Heroult smelting process, a molten solution of alumina and cryolite is subjected to an electric current. This process allows for the separation of aluminum from other elements and its collection at the bottom of the cell. Similarly, in the making of copper tubing, copper is often melted and cast into desired shapes and forms, which involves a smelting-like process.
Therefore, the process by which aluminum is extracted from bauxite is most similar to the making of copper tubing (option B). Both processes involve mining of the raw material, refining or purification of the desired substance, and subsequent casting or shaping of the material into usable forms.
Answer: B
