Last visit was: 18 Nov 2025, 15:50 It is currently 18 Nov 2025, 15:50
Close
GMAT Club Daily Prep
Thank you for using the timer - this advanced tool can estimate your performance and suggest more practice questions. We have subscribed you to Daily Prep Questions via email.

Customized
for You

we will pick new questions that match your level based on your Timer History

Track
Your Progress

every week, we’ll send you an estimated GMAT score based on your performance

Practice
Pays

we will pick new questions that match your level based on your Timer History
Not interested in getting valuable practice questions and articles delivered to your email? No problem, unsubscribe here.
Close
Request Expert Reply
Confirm Cancel
User avatar
Bunuel
User avatar
Math Expert
Joined: 02 Sep 2009
Last visit: 18 Nov 2025
Posts: 105,355
Own Kudos:
Given Kudos: 99,964
Products:
Expert
Expert reply
Active GMAT Club Expert! Tag them with @ followed by their username for a faster response.
Posts: 105,355
Kudos: 778,069
 [16]
Kudos
Add Kudos
16
Bookmarks
Bookmark this Post
User avatar
GMATinsight
User avatar
Major Poster
Joined: 08 Jul 2010
Last visit: 18 Nov 2025
Posts: 6,835
Own Kudos:
16,349
 [5]
Given Kudos: 128
Status:GMAT/GRE Tutor l Admission Consultant l On-Demand Course creator
Location: India
GMAT: QUANT+DI EXPERT
Schools: IIM (A) ISB '24
GMAT 1: 750 Q51 V41
WE:Education (Education)
Products:
Expert
Expert reply
Schools: IIM (A) ISB '24
GMAT 1: 750 Q51 V41
Posts: 6,835
Kudos: 16,349
 [5]
2
Kudos
Add Kudos
2
Bookmarks
Bookmark this Post
User avatar
yashikaaggarwal
User avatar
Senior Moderator - Masters Forum
Joined: 19 Jan 2020
Last visit: 17 Jul 2025
Posts: 3,086
Own Kudos:
3,102
 [1]
Given Kudos: 1,510
Location: India
GPA: 4
WE:Analyst (Internet and New Media)
Posts: 3,086
Kudos: 3,102
 [1]
1
Kudos
Add Kudos
Bookmarks
Bookmark this Post
avatar
Superman249
Joined: 10 Jan 2018
Last visit: 04 Jan 2021
Posts: 71
Own Kudos:
135
 [1]
Given Kudos: 20
Posts: 71
Kudos: 135
 [1]
Kudos
Add Kudos
1
Bookmarks
Bookmark this Post
IMO:- E (20min)

Two ways of doing it:-

way 1

Pipe of Dia 6 cm fills cistern in 40 min

Hence in 1 min Pipe of Dia 6 cm fills (1/40) amount of cistern ------------------------1

In 1 min Pipe of Dia 2 cm fills > 2/6 * 1/40 ( as the amount of water flow is proportional to Dia)--------------------------------2

In 1 min Pipe of Dia 4 cm fills > 4/6 * 1/40 ( as the amount of water flow is proportional to Dia)----------------------------------3

Together In 1 min > adding 1+2+3

>(1/40) + 1/120 + 1/60 amount of cistern filled in 1 min
>1/20 amount in 1 min

So full Cistern in 20 min


Way 2

As per Info
Flow Amount = KD (K some constant), D= Dia of Pipe

The capacity of Cistern = T * K (D1+D2+D3) = T *K (2+4+6) = 12KT

Capacity = 6K * 40 ( as per info )
replacing in above
> 6K * 40 = 12KT
>T:- 20 min
avatar
rajeshforyouu
Joined: 04 Dec 2019
Last visit: 17 Nov 2025
Posts: 11
Own Kudos:
18
 [10]
Given Kudos: 15
Posts: 11
Kudos: 18
 [10]
3
Kudos
Add Kudos
6
Bookmarks
Bookmark this Post
Dia: 2,4,6
radious: 1,2,3

Rate: 1,4,9 (Square of radious)

Largest one, the one with rate 9, takes 40 mins to fill the tank.

So, Tank Size is 9*40 = 360

Keeping all the Pipes open the combined rate becomes 1+4+9 = 14

So time required is 360/14 = 180/7 = 25 5/7 min

25 5/7
Option A
avatar
Superman249
Joined: 10 Jan 2018
Last visit: 04 Jan 2021
Posts: 71
Own Kudos:
Given Kudos: 20
Posts: 71
Kudos: 135
Kudos
Add Kudos
Bookmarks
Bookmark this Post
GMATinsight
Bunuel
In what time a cistern is filled by three pipes of diameter 2cm, 4cm and 6cm respectively, if the time taken by largest pipe to fill the tank is 40 minutes. Amount of water flowing through the pipe is proportional to the diameter of the pipe

A. 25 5/7 min
B. 25 3/7 min
C. 23 5/7 min
D. 23 4/7 min
E. None of these

Volume is proportional to Diameter^2

i.e. Volume by largest pipe in 40 minutes = \(k*40*6^2 = 1440k = \)Volume of Tank

The Volume of water by three pipes together in 1 min \(= k*2^2+k*4^2+k*6^2 = 56k\)

Time to fill tank by thre epipes together \(= \frac{1440k}{56k} = \frac{180}{7} = \)25 5/7 minutes

Answer: Option A

I understand you assumed Flow rate to be proportional to D^2 (Circular Area)

Why it cant be proportional to D
User avatar
Archit3110
User avatar
Major Poster
Joined: 18 Aug 2017
Last visit: 18 Nov 2025
Posts: 8,423
Own Kudos:
Given Kudos: 243
Status:You learn more from failure than from success.
Location: India
Concentration: Sustainability, Marketing
GMAT Focus 1: 545 Q79 V79 DI73
GMAT Focus 2: 645 Q83 V82 DI81
GPA: 4
WE:Marketing (Energy)
GMAT Focus 2: 645 Q83 V82 DI81
Posts: 8,423
Kudos: 4,979
Kudos
Add Kudos
Bookmarks
Bookmark this Post
Bunuel
In what time a cistern is filled by three pipes of diameter 2cm, 4cm and 6cm respectively, if the time taken by largest pipe to fill the tank is 40 minutes. Amount of water flowing through the pipe is proportional to the diameter of the pipe

A. 25 5/7 min
B. 25 3/7 min
C. 23 5/7 min
D. 23 4/7 min
E. None of these

given that Amount of water flowing through the pipe is proportional to the diameter of the pipe

so largest pipe ie 6cm takes 40 min so volume of tank must be 240
when all 3 pipes are opened together ; 2+4+6 ; flow rate must be 12
time taken ; 240/12 ; 20
OPTION E
User avatar
Babineaux
Joined: 24 May 2018
Last visit: 26 Nov 2020
Posts: 93
Own Kudos:
111
 [1]
Given Kudos: 35
Location: India
Concentration: General Management, Human Resources
WE:Engineering (Energy)
Posts: 93
Kudos: 111
 [1]
1
Kudos
Add Kudos
Bookmarks
Bookmark this Post
Let’s calculate the cross sectional area of each pipe,
They are 1pi, 4pi and 9pi.
Thus the ratio is 1:4:9,
Total ratio 14.
Now for the bigger día. time taken is 40 mins.
So for the smaller dia. i.e., the first pipe, to complete the tank time must be 360 mins.
And for the second pipe time will be 90 mins.

Now when all are open, 1/360 + 1/90 + 1/40 = 14/360

Hence total time to fill the tank is 180/7 mins.

IMO ans is A 25 5/7 mins.

Posted from my mobile device
User avatar
GMATinsight
User avatar
Major Poster
Joined: 08 Jul 2010
Last visit: 18 Nov 2025
Posts: 6,835
Own Kudos:
16,349
 [1]
Given Kudos: 128
Status:GMAT/GRE Tutor l Admission Consultant l On-Demand Course creator
Location: India
GMAT: QUANT+DI EXPERT
Schools: IIM (A) ISB '24
GMAT 1: 750 Q51 V41
WE:Education (Education)
Products:
Expert
Expert reply
Schools: IIM (A) ISB '24
GMAT 1: 750 Q51 V41
Posts: 6,835
Kudos: 16,349
 [1]
Kudos
Add Kudos
1
Bookmarks
Bookmark this Post
yashikaaggarwal
GMATinsight


Volume is proportional to Diameter^2

i.e. Volume by largest pipe in 40 minutes = \(k*40*6^2 = 1440k = \)Volume of Tank

Sir Why had we use diameter instead of radius directly in volume. Can't we calculate volume by its original formula and then put proportionate to diameter? Kindly Revert

Posted from my mobile device

yashikaaggarwal

Rate of the volume of water coming out of a pipe = Force at which water is flowing*Cross-sectional area of the pipe and not just one dimension



Volume is a 3 Dimensional entity which is calculated as Cross Sectional Area*Length up to which it is extended

e.g. Volume of Cube = Area of a face * Length upto which it is extended \(= a^2*a = a^3\)

e.g. Volume of Cuboid = Area of a face * Length upto which it is extended \(= (l*b)*h\)

e.g. Volume of Cylinder = Area of cross section * Length upto which it is extended \(= (πr^2)*h\)
User avatar
yashikaaggarwal
User avatar
Senior Moderator - Masters Forum
Joined: 19 Jan 2020
Last visit: 17 Jul 2025
Posts: 3,086
Own Kudos:
Given Kudos: 1,510
Location: India
GPA: 4
WE:Analyst (Internet and New Media)
Kudos
Add Kudos
Bookmarks
Bookmark this Post
GMATinsight
yashikaaggarwal
GMATinsight


Volume is proportional to Diameter^2

i.e. Volume by largest pipe in 40 minutes = \(k*40*6^2 = 1440k = \)Volume of Tank

Sir Why had we use diameter instead of radius directly in volume. Can't we calculate volume by its original formula and then put proportionate to diameter? Kindly Revert

Posted from my mobile device

yashikaaggarwal

Rate of the volume of water coming out of a pipe = Force at which water is flowing*Cross-sectional area of the pipe and not just one dimension



Volume is a 3 Dimensional entity which is calculated as Cross Sectional Area*Length up to which it is extended

e.g. Volume of Cube = Area of a face * Length upto which it is extended \(= a^2*a = a^3\)

e.g. Volume of Cuboid = Area of a face * Length upto which it is extended \(= (l*b)*h\)

e.g. Volume of Cylinder = Area of cross section * Length upto which it is extended \(= (πr^2)*h\)
So cross sectional area is diameter. And k is π ?
avatar
vipulshahi
Joined: 24 Sep 2013
Last visit: 30 Aug 2021
Posts: 163
Own Kudos:
Given Kudos: 40
Location: Saudi Arabia
GPA: 3.8
WE:Project Management (Energy)
Posts: 163
Kudos: 113
Kudos
Add Kudos
Bookmarks
Bookmark this Post
Let suppose three pipes whose diameter is
D1 = 6 ; D2 = 4 ; D3 = 2
Time taken by largest pipe , T1 = 40minutes

It is given that Water flow from the pipe is proportional to diameter
If we calculate volume of tank ,
Volume of tank = Volume of water from largest pipes = 40*6^2 * m

Volume of water by the pipe, whose diameter is 4cm = time* 4^2 * m

Volume of water by the pipe, whose diameter is 2cm = time*2^2*m

Volume of water by 3 pipes in a minute= 6^2 *m * 4^2* m * 2^2 * m
= 36m + 16m + 4m
= 56m

Total Time required by the pipes together = Volume of tank / Volume of water by 3 pipes= 40* 6^2 * m / 56* m
= 40*6*6/56
= 20*6*6/ 28
= 10*6*6/14
= 5*6*6/7
=22 5/7

Answer :A
User avatar
ScottTargetTestPrep
User avatar
Target Test Prep Representative
Joined: 14 Oct 2015
Last visit: 18 Nov 2025
Posts: 21,712
Own Kudos:
26,989
 [5]
Given Kudos: 300
Status:Founder & CEO
Affiliations: Target Test Prep
Location: United States (CA)
Expert
Expert reply
Active GMAT Club Expert! Tag them with @ followed by their username for a faster response.
Posts: 21,712
Kudos: 26,989
 [5]
4
Kudos
Add Kudos
1
Bookmarks
Bookmark this Post
Bunuel
In what time a cistern is filled by three pipes of diameter 2cm, 4cm and 6cm respectively, if the time taken by largest pipe to fill the tank is 40 minutes. Amount of water flowing through the pipe is proportional to the diameter of the pipe

A. 25 5/7 min
B. 25 3/7 min
C. 23 5/7 min
D. 23 4/7 min
E. None of these

Solution:

We are given that the amount of water flowing through the pipe is proportional to the diameter of the pipe. What it really means is the amount of water flowing through the pipe depends on the volume of the pipe. Recall that the volume of a pipe (in the shape of a cylinder) is V = πr^2 * L where r is the radius of the pipe and L is the length of the pipe. Assume all 3 pipes have the same length. We can disregard the variable L. We can also disregard the constant π. Therefore, the amount of flowing through the pipe is proportional to r^2 or to d^2 (since d = 2r). Therefore, the time, t, in minutes, taken the 4-cm diameter pipe to fill the cistern alone is:

6^2 x 40 = 4^2 x t

1440 = 16t

90 = t

Similarly, the amount of time, s, in minutes, taken the 2-cm diameter pipe to fill the cistern alone is:

6^2 x 40 = 2^2 x s

1440 = 4s

360 = s

Therefore, the combined rate of all 3 pipes is 1/360 + 1/90 + 1/40 = 1/360 + 4/360 + 9/360 = 14/360 = 7/180. Since time is the inverse of rate, the time taken for all 3 pipes to fill the cistern is 180/7 = 25 5/7 minutes.

Answer: A
User avatar
abhi19051990
Joined: 04 Apr 2018
Last visit: 13 Aug 2022
Posts: 21
Own Kudos:
20
 [1]
Given Kudos: 148
Location: India
Concentration: General Management, Operations
GMAT 1: 700 Q50 V34 (Online)
GPA: 3
WE:Operations (Hospitality and Tourism)
GMAT 1: 700 Q50 V34 (Online)
Posts: 21
Kudos: 20
 [1]
1
Kudos
Add Kudos
Bookmarks
Bookmark this Post
Amount of water flowing is proportional to the diameter, all of you are assuming that it should be (diameter)^2 as per common knowledge of geometry while that should be clearly mentioned by the question.
avatar
yahya729
Joined: 30 Apr 2021
Last visit: 17 Oct 2022
Posts: 35
Own Kudos:
9
 [2]
Given Kudos: 39
GMAT 1: 710 Q50 V37
Products:
GMAT 1: 710 Q50 V37
Posts: 35
Kudos: 9
 [2]
2
Kudos
Add Kudos
Bookmarks
Bookmark this Post
GMATinsight
Bunuel
In what time a cistern is filled by three pipes of diameter 2cm, 4cm and 6cm respectively, if the time taken by largest pipe to fill the tank is 40 minutes. Amount of water flowing through the pipe is proportional to the diameter of the pipe

A. 25 5/7 min
B. 25 3/7 min
C. 23 5/7 min
D. 23 4/7 min
E. None of these

Volume is proportional to Diameter^2

i.e. Volume by largest pipe in 40 minutes = \(k*40*6^2 = 1440k = \)Volume of Tank

The Volume of water by three pipes together in 1 min \(= k*2^2+k*4^2+k*6^2 = 56k\)

Time to fill tank by thre epipes together \(= \frac{1440k}{56k} = \frac{180}{7} = \)25 5/7 minutes

Answer: Option A

sorry but this isn't correct you can't assume that the volume is proportional to the diameter square
User avatar
Regor60
Joined: 21 Nov 2021
Last visit: 17 Nov 2025
Posts: 528
Own Kudos:
Given Kudos: 459
Posts: 528
Kudos: 383
Kudos
Add Kudos
Bookmarks
Bookmark this Post
Poorly written question since the stipulated answer depends on the common knowledge of diameter SQUARED but conflicts with the question stem, requiring the responder to ignore the stem, a GMAT no-no.

Archived Topic
Hi there,
This topic has been closed and archived due to inactivity or violation of community quality standards. No more replies are possible here.
Where to now? Join ongoing discussions on thousands of quality questions in our Problem Solving (PS) Forum
Still interested in this question? Check out the "Best Topics" block above for a better discussion on this exact question, as well as several more related questions.
Thank you for understanding, and happy exploring!
Moderator:
Math Expert
105355 posts