An alloy of copper and zinc contains copper and zinc in the ratio 5 :

Question

An alloy of copper and zinc contains copper and zinc in the ratio 5 : 3. Another alloy of copper and zinc contains copper and zinc in the ratio 1 : 7. In what ratio should the two alloys be mixed so that the resultant alloy contains equal proportions of copper and zinc?

A. 1 : 5
B. 7 : 3
C. 5 : 3
D. 3 : 1
E. 4 : 3

let x=alloy 1
y=alloy 2
(5x/8)+y/8=4(x+y)/8
x/y=3
3:1
D

A. 1 : 5
B. 7 : 3
C. 5 : 3
D. 3 : 1
E. 4 : 3

VenoMfTw · Accepted Answer

IMO: D Cu:zn = 5:3 Cu:zn = 1:7 Thus in 1st alloy in total of 8(5+3) parts 5 parts contain copper ==> Cu1 = 5/8 In 2nd alloy in total of 8(1+7) parts 1 part contains copper ==> Cu2 = 1/8 After combining Cu: Zn = 1:1 In final combination in total of 2 parts 1 part contain copper ==> 1/2 1.jpg Thus Cu2 : Cu1 = 1:3 The ratio of Alloy1 : Alloy2 is asked = 3:1

GMATinsight · Answer

Alloy-1: Copper: Zinc = 5:3, Let Quantity = x
i.e. Copper in Alloy-1 =  *x = (5/8)x
and Zinc in Alloy-1 =  *x = (3/8)x

Alloy-2: Copper: Zinc = 1:7, Let Quantity = y
i.e. Copper in Alloy-2 =  *y = (1/8)y
and Zinc in Alloy-1 =  *y = (7/8)y

After Combining the two alloys
Copper = (5/8)x + (1/8)y
Zinc = (3/8)x + (7/8)y

Now, (5x + y)/8 = (3x + 7y)/8
i.e. 2x = 6y
i.e. x = 3y
i.e. x/y = 3/1

Answer: option D

AA2014 · Answer

simple mixtures problem.

5x + y = 3x + 7y (since quantity of Cu and Zn in resultant mixture is equal)

2x = 6y
x = 3y

Ans. = D

TimeTraveller · Answer

Let Alloy_1 be x units, and let Alloy_2 be y units.

So, fraction of copper in Alloy_1 = 5x/8, and fraction of zinc in Alloy_1 = 3x/8.

Similarly, fraction of copper in Alloy_2 = y/8, and fraction of zinc in Alloy_2 = 7y/8.

Mixing them, we get
copper = 5x/8 + y/8; zinc = 3x/8 + 7y/8.

So, 5x+y = 3x+7y
-> x = 3y
-> x/y = 3/1.

So, they must be mixed in the ratio 3 : 1. Ans (D).

aimtoteach · Answer

Putting together an equation with the numbers - 5x+y/ 3x+7y = 1

Solving it out - 2x=6y

Hence 3/1

Option D

D3N0 · Answer

Ans: D

Solution: While the ratio of Cu and Zn in both the mixture is given but not the quantity.
so we assume that M1 is x, and M2 is y.
now we know in M1= 5x/8 Cu, 3x/8 Zn
in M2 y/8 Cu and 7y/8

now we want to make the total quantity of Cu and Zn equal
use the following data and make equation

5x/8 + y/8 = 3x/8 + 7y/8
 it gives x = 3y
so the ratio must be x:y = 3y:y = 3:1

jasimuddin · Answer

let ratio of 1st alloy and 2nd alloy in 3rd mixture=k:1
5k+1=3k+7
k=3
ans 3:1 (D)

gracie · Answer

An alloy of copper and zinc contains copper and zinc in the ratio 5 : 3. Another alloy of copper and zinc contains copper and zinc in the ratio 1 : 7. In what ratio should the two alloys be mixed so that the resultant alloy contains equal proportions of copper and zinc?

A. 1 : 5
B. 7 : 3
C. 5 : 3
D. 3 : 1
E. 4 : 3

let x=alloy 1
y=alloy 2
(5x/8)+y/8=4(x+y)/8
x/y=3
3:1
D

A. 1 : 5
B. 7 : 3
C. 5 : 3
D. 3 : 1
E. 4 : 3

let x=alloy 1
y=alloy 2
(5x/8)+y/8=4(x+y)/8
x/y=3
3:1
D

EMPOWERgmatRichC · Answer

Hi All,

Beyond the algebra that can be used here, there are often other approaches that are fairly straight-forward (and sometimes faster/easier than doing "math"). Since the answers provide 5 ratios for us, we can use them "against" the information in the prompt to find the one ratio that gives us an equal proportion of copper and zinc. Let's TEST THE ANSWERS:

The two ratios… 
C:Z 
5:3

and

C:Z 
1:7

Answer A: 1:5 gives us (5C + 3Z) + (5C + 35Z) --> 10C and 38Z --> NOT a match 
Answer B: 7:3 gives us (35C + 21Z) + (3C + 21Z) --> 38C + 42Z --> NOT a match 
Answer C: 5:3 gives us (25C + 15Z) + (3C + 21Z) --> 28C + 36Z --> NOT a match 
Answer D: 3:1 gives us (15C + 9Z) + (1C + 7Z) --> 16C + 16Z --> This IS a match 
Answer E: 4:3 gives us (20C + 12Z) + (3C + 21Z) --> 23C + 33Z --> NOT a match

Final Answer:  D

GMAT assassins aren't born, they're made, 
Rich

JeffTargetTestPrep · Answer

We can let the ratio of the first alloy of copper to zinc = 5x: 3x

We can let the ratio of the second alloy of copper to zinc = y : 7y

We can create the equation:

5x + y = 3x + 7y

2x = 6y

x = 3y

x/y = 3/1

Answer: D

Shrey08 · Answer

Hi  VeritasKarishma  ,

I was trying to solve this using weighted average and here is what I did:

The final mixture contains alloy in the ratio 1:1

\frac{W1}{W2}  =  (\frac{5}{3}-1)/(1-\frac{1}{7})

\frac{W1}{W2} = \frac{7}{9}

Can you please tell where did I go wrong ?

Shrey08 · Answer

I think I understand where I went wrong.

I should not use the ratio copper is to alloy as is. It should be "part" by "whole".

\frac{W1}{W2}  =  (\frac{5}{8}-\frac{1}{2})/(\frac{1}{2}-\frac{1}{8})

\frac{W1}{W2} = \frac{1}{3}

KarishmaB · Answer

Yes, think about the physical quantities you are dealing with - concentration (part/whole), volume, amount
Concentration of copper is 5/8 and 1/8 in the two. You need to mix them to get concentration of 1/2.
You need to find the ratio of the volumes in which you mix them.

Check here: https://www.gmatclub.com/forum/veritas-prep-resource-links-no-longer-available-399979.html#/2011/0 ... -mixtures/

satya2029 · Answer

Amount of copper in 40 gm of mixture=20gm....(1:1, 1/2*40=20)
Amount of copper in alloy 1 in 40 gm of mixture=25 gm(5:3..5/8*40=25)
Amount of copper in alloy 1 in 40 gm of mixture=5 gm(1:7..1/8*40=5)
C2..............C...............C1
5................20.................25
C2/C1=(25-20)/(20-5)
=5/15
C1:C2=3:1
D:)

Shrey08 · Answer

Thank you for confirming  VeritasKarishma ,

I did go through the blog you mentioned above and others in the series. I must say I could never approach the Weighted average and mixture problems the way I do now after reading those blogs. Thank you for sharing such an insightful write up.

spoorti · Answer

Consider either copper or zinc. I am gonna consider copper here. There are two alloys with ratio 5:3 and 1:7.To make the ratio equal means it should be 4:4. So I am gonna use the quick and simplest way to calculate the ratio. 
5 1
 4
3 : 1

Posted from my mobile device

TheNightKing · Answer

Going through the options is the easy approach.

3*(5:3)+1*(1:7)=15:9+1:7=16:16

And that's what we need.

Answer D.

bumpbot · Answer

Automated notice from GMAT Club BumpBot: 

A member just gave Kudos to this thread, showing it’s still useful. I’ve bumped it to the top so more people can benefit. Feel free to add your own questions or solutions.

 This post was generated automatically.

An alloy of copper and zinc contains copper and zinc in the ratio 5 :

Prep Toolkit

Top 5 GMAT Debrief Videos

615 to 715 in 15 Days (Ria's Strategies)

More than Quant/Verbal Abilities: Speed vs. Accuracy

745 with Only Self-Prep and GMAT Club

From 555 to 765: 210-point Improvement

Perfect 805 Score Debrief by Julia

My Rewards

GMAT Problem Solving (PS) Questions

An alloy of copper and zinc contains copper and zinc in the ratio 5 :

Prep Toolkit

615 to 715 in 15 Days (Ria's Strategies)

More than Quant/Verbal Abilities: Speed vs. Accuracy

745 with Only Self-Prep and GMAT Club

From 555 to 765: 210-point Improvement

Perfect 805 Score Debrief by Julia

My Rewards