What is the positive integer n?

Question

(1) For every positive integer m, the product m(m + 1)(m + 2) ... (m + n) is divisible by 16
(2) n^2 - 9n + 20 = 0

Guys - the OA is C. But can someone please let me know what does statement 1 implies over here?

For me it says that the product of consecutive integers is divisible by 16. But how its used in this question?

I understand statement 2 though.

Bunuel · Accepted Answer

What is the positive integer n?

(1) For every positive integer m, the product m(m + 1)(m + 2) ... (m + n) is divisible by 16 --> as the given product is divisible by 16 for EVERY positive integer then the least value of n will be for the worst case scenario, which is for m=1, then m(m + 1)(m + 2) ... (m + n) to be divisible by 16 n must be at least 5: 1*2*3*4*5*6=divisible by 16 (as we have three even numbers out of which one is also a multiple of 4, so the product has 2*2^2*2=16 as a factor), but if n=4 and m=1 then 1*2*3*4*5 is not divisible by 16. Naturally if n is more than 5, then the product m(m + 1)(m + 2) ... (m + n) will also be divisible by 16 for the same reason: there will be at least 3 evens out of which one is also a multiple of 4. So from this statement we have that:  n\geq{5} . Not sufficient.

Side note: we basically have the product of n+1 consecutive integers which is always divisible by (n+1)! and it to be divisible by 16, n must be more than or equal to 5.

(2) n^2 - 9n + 20 = 0 --> n=4 or n=5. Not Sufficient.

(1)+(2) From (1)  n\geq{5}  and from (2)  n=4  or  n=5  -->  n=5 . Sufficient.

Answer: C.

EvaJager · Answer

Usually, when approaching a DS question, you start with statement (1), then go to statement (2)...
If you don't know how to attack statement (1), go directly to (2), especially if it looks "friendlier", as in this case.

(2) The given quadratic equation has two solutions:  n=4  and  n=5 .
Not sufficient. So, the answer is certainly not B.

Now go back to (1) and start by checking the two values for  n  you obtained in (2).
Take  m=1 . Obviously,  1\cdot2\cdot3\cdot4\cdot5  is not divisible by 16, but  1\cdot2\cdot3\cdot4\cdot5\cdot6  is.
The answer can be C, if without the condition in statement (2), there can be more than one value of  n  which fulfills the condition. 
You don't have to look for the smallest  n . Obviously, if  n=15 , we have  16  consecutive numbers, so their product is definitely divisible by 16.
Therefore, the answer cannot be A.

In conclusion, answer is C.

KarishmaB · Answer

Product of consecutive integers have some properties. e.g. product of any two consecutive positive integers is even, product of any 3 consecutive integers is even and is divisible by 3 so basically the product is divisible by 6.

The first statement just tells you that every product of (n+1) consecutive integers is always divisible by 16.

Say if n = 3
Is 1*2*3*4 divisible by 16? No! So n cannot be 3.

Is 1*2*3....*14*15*16 divisible by 16? Yes. Will product of any 16 consecutive integers be divisible by 16? Yes. Product of any 17 consecutive integers will also be divisible by 16. So n can take many values.

What is the smallest value that n can take?
Every set of 4 consecutive integers will have a number which has 4 as a factor and it will have another even number i.e. the product of 4 consecutive numbers must be divisible by 8.
When you have product of 5 consecutive factors, again the product must be divisible by at least 8 e.g. 1*2*3*4*5
When you have 6 consecutive factors, there must be a number with 4 as a factor and 2 other even numbers i.e. the product must have 16 as a factor e.g. 1*2*3*4*5*6
Therefore, you must have at least 6 consecutive integers i.e. n must be at least 5.

fameatop : n cannot be 4. If you have 5 consecutive factors, the product will not be divisible by 16 in every case e.g. it is not divisible in case of 1*2*3*4*5

Statement 1 tells you that n is at least 5
Statement 2 tells you that n is 4 or 5.

So n must be 5 using both
Answer (C)

ashd · Answer

Hi

From statement 1, if we consider m=2, 
2*3*4*5*6 will be divisible by 16.
and here m+n=6 => n=4
 
So IMO the ans should be E

please correct me if I am wrong.

EvaJager · Answer

Statement (1) says:  For every positive integer m , the product m(m + 1)(m + 2) ... (m + n) is divisible by 16.
If m = 1 and n = 4, 1*2*3*4*5 is not divisible by 16. So n cannot be 4.

ashd · Answer

Hi

Again my question, why are we only considering the case where m=1?
why cant we consider m = 2 or the series starting from 2
In this case, 2*3*4*5*6 is divisible by 16

EvaJager · Answer

We are not considering only the case m=1. For a given n, the product m(m+1)(m+2)...(m+n) must be divisible by 16 for m=1, also for m=2, for m=3, ...,  for every integer m . But if for a specific value of m the product is not divisible by 16, that particular n is not an acceptable value. Since for m=1 the product is not divisible by 16 when n=4, we can conclude that n cannot be 4. The property doesn't for for m=9 either: 9*10*11*12*13. If you continue, you can find even more values for m for which the property will not hold when n=4.

KarishmaB · Answer

It is a technique we use. We want to find the value of n which holds for every possible value of m. When you want to prove that a particular value of n will hold for every value of m, it is very hard to do. You possibly cannot calculate for EVERY value of m. So we use the reverse logic. We assume that n takes a particular value and then try to find one value of m for which it doesn't hold. Then we can say that n cannot take that particular value.

Here, we are saying that if n = 4, it doesn't hold for m = 1. It doesn't matter whether it holds for other values of m or not. As long as there is even a single value of m for which it doesn't hold, we know n cannot be 4.

When n = 5, we see that it holds for quite a few values of m. Now the question is, will it hold for every value of m? For that, we use our theoretical knowledge to say that yes, it will hold for every value of m.

ishdeep18 · Answer

Found it really understandable.. Thank You So much Sir . if (1) is not friendly go to (2) and take out possible values..it will save lot of time and thinking..

Regards Ishdeep Singh

PerfectScores · Answer

Statement I is insufficient:
If n = 8 then m(m+1)(m+2)...(m+8) will have at least 4 even integers which means the product will have to be divisible by 16
same goes for n = 9, n = 10 etc....

Statement II is insufficient:
n^2 - 5n - 4n + 20 = 0
n(n-5) - 4( n - 5) = 0
(n-5) (n-4) = 0

We get two value of n, hence not sufficient.

Combining is sufficient:

If we say that n = 4 then m (m+1) (m+2) (m+3) (m+4) will not be divisible by 16 if m = 1 (1 (2)(3)(4)(5))
If we say that n = 5 then m (m+1) (m+2)(m+3) (m+4)(m+5) will always be divisible by 16. Lets try m = 1(2)(3)(4)(5)(6) as there will be a minimum of 3 even numbers with a multiple of 4 between them. Hence a factor of 16 is a must.

Hence the answer is C.

kham71 · Answer

What is the positive integer n?

(1) For every positive integer m, the product m(m + 1)(m + 2) ... (m + n) is divisible by 16:

In other words n+1 is the number of elements in a set of any consecutive positive integers, where n+1 guarantees divisibility of the product of these elements by 16 (the product of these consecutive integers should have four factors of 2). At the beginning of the number line there is a maximal scarcity of factors of 2 and this is where multiplying the largest number of consecutive positive integers will be required to attain divisibility by 16. 1*(1+1)*(1+2)*(1+3)*(1+4)*(1+5). Therefore when n >=5, the product of all elements in the set will definitely be divisible by 16 regardless of the position of the consecutive positive integers on the number line.

n >= 5. INSUFF

(2) n^2 - 9n + 20 = 0 n = 4 or 5. INSUFF

Combined: SUFF. Answer is C.

AlexGenkins1234 · Answer

St.1 
- There are a lot of values of n. 
- Specifically for every n>=5 (sufficient condition, but not a must), we will have 3 consecutive even integers. and if we have 3 consecutive even integers, m(m + 1)(m + 2) ... (m + n) is divisible by 16.
- for (n=4, and m is even) we will have m(m + 1)(m + 2) ... (m + n) is divisible by 16.
-> not suff.

St2. n=4 or n=5. 
-> not suff.

St1+St2
-> for n=5, m could be even or odd - >suff.
notice that if n=4, and m is odd -> m(m + 1)(m + 2) ... (m + n) is NOT divisible by 16. so n=4 is disqualified.

anairamitch1804 · Answer

First of all note that the phrase "For every positive integer m, the product m(m +1)(m + 2)...(m + n)" simply implies product of any (n + 1) consecutive positive integers. Now, the product of any (n + 1) consecutive positive integers is always divisible by (n + 1)!. So if we have to make the product of any (n + 1) consecutive positive integers divisible by 16, we have to choose n in such a way that 16 is a factor of (n + 1)!. Which is only possible if (n + 1) ≥ 6, i.e. n ≥ 5

Statement 1: Implies the product of any (n + 1) consecutive positive integers is divisible by 16. Now the product of any 6 or more consecutive integers is always divisible by 16. Hence, (n + 1) ≥ 6 => n ≥ 5.

For any value of m other than 1, the product m(m +1)(m + 2)...(m + n) is always divisible by 16 for both n = 4 and n = 5.

But if m = 1, then, 
For n = 4 --> m(m +1)(m + 2)...(m + n) = 1*2*3*4*5 = 120 --> NOT divisible by 16 
For n = 5 --> m(m +1)(m + 2)...(m + n) = 1*2*3*4*5*6 = 720 --> DIVISIBLE by 16 
For n > 5 --> m(m +1)(m + 2)...(m + n) = 1*2*3*4*5*6*n = 720*n --> DIVISIBLE by 16

Hence for every positive integer m, the product m(m +1)(m + 2)...(m + n) is NOT divisible by 16 if n = 4. Hence, 4 cannot be a value of n.

But for every positive integer m, the product m(m +1)(m + 2)...(m + n) is DIVISIBLE by 16 if n ≥ 5. Hence, any integer greater than 5 can be a value of n.
Not sufficient

Statement 2: n² - 9n + 20 = 0 
=> (n - 4)(n - 5) = 0 
Hence, n = 4 or n = 5

Not sufficient

1 & 2 Together: As n ≥ 5, n must be equal to 5.

Sufficient

The correct answer is C.

SAHILBISHT0603 · Answer

For the same reason we are not starting with m=16,32 or something else because the universality of solution will not be applicable if we dont start from the least value of positive integer

SAHILBISHT0603 · Answer

For the same reason we are not starting with m=16,32 or something else because the universality of solution will not be applicable if we dont start from the least value of positive integer

bumpbot · Answer

Hello from the GMAT Club BumpBot!

Thanks to another GMAT Club member, I have just discovered this valuable topic, yet it had no discussion for over a year. I am now bumping it up - doing my job. I think you may find it valuable (esp those replies with Kudos).

Want to see all other topics I dig out? Follow me (click follow button on profile). You will receive a summary of all topics I bump in your profile area as well as via email.

What is the positive integer n?

Prep Toolkit

Top 5 GMAT Debrief Videos

615 to 715 in 15 Days (Ria's Strategies)

More than Quant/Verbal Abilities: Speed vs. Accuracy

745 with Only Self-Prep and GMAT Club

From 555 to 765: 210-point Improvement

Perfect 805 Score Debrief by Julia

My Rewards

GMAT Data Sufficiency (DS) Questions

What is the positive integer n?

Prep Toolkit

615 to 715 in 15 Days (Ria's Strategies)

More than Quant/Verbal Abilities: Speed vs. Accuracy

745 with Only Self-Prep and GMAT Club

From 555 to 765: 210-point Improvement

Perfect 805 Score Debrief by Julia

My Rewards